Alcatel-Lucent 7750 Reference Manual page 149

Table 52: Enhanced Subscriber Management Accounting (description) (Continued)
Attribute ID Attribute Name
87 NAS-Port-Id
95 NAS-IPv6-Address
96 Framed-Interface-Id
7750 SR RADIUS Attributes Reference Guide
A text string which identifies the physical/logical port of the NAS which is
authenticating the user and/or reported for accounting. Attribute is also used
in CoA and Disconnect Message (part of the user identification-key). The nas-
port-id for physical ports usually contains <slot>/<mda>/<port>/
<vlan|vpi>.<vlan|vci>. The physical port can have an optional prefix-string
(max 8 chars) and suffix-string (max 64 chars) added for Accounting
(configure subscriber-mgmt radius-accounting-policy <name> include-
radius-attribute nas-port-id [prefix-string <string>] [suffix <circuit-
id|remote-id>]). For logical access circuits (LNS) the nas-port-id is a fixed
concatenation (delimiter #) of routing instance, tunnel-server-endpoint,
tunnel-client-endpoint, local-tunnel-id, remote-tunnel-id, local-session-id,
remote-session-id and call sequence number.
For WLAN-GW, the Nas-Port-Id is a text string with format defined by the
aggregation type (see WLAN-GW section for details):
GRE or L2TPv3: "<tunnel-type> rtr-<virtual router id>#lip-<local ip
address>#rip-<remote ip address>"
VLAN: "VLAN svc-<svc-id>[:<vlan>[.<vlan>]]"
The identifying IP Address of the NAS requesting the Authentication or
Accounting. Included when the RADIUS server is reachable via IPv6.
The address is determined by the routing instance through which the RADIUS
server can be reached:
"Management" — The active ipv6 address in the Boot Options File (bof
address <ipv6-address>)
"Base" or "VPRN" — The ipv6 address of the system interface (configure
router interface system ipv6 address <ipv6-address>).
The address can be overwritten with the configured ipv6-source-address
(configure aaa radius-server-policy <policy-name> servers ipv6-source-
address <ipv6-address>).
Contains the IPv6 interface ID from the user. The attribute can optionally be
included in Accounting messages (configure subscriber-mgmt radius-
accounting-policy include-radius-attribute framed-interface-id). The
Framed-Interface-Id attribute is not sent in RADIUS Authentication and
silently ignored in RADIUS Accept.
RADIUS Attributes Reference
Description
Page 149