[101] Error-Cause Attribute Values; Table 81: Radius Coa Message [101] Error-Cause Values - Alcatel-Lucent 7750 Reference Manual

[101] Error-Cause Attribute Values

[101] Error-Cause Attribute Values
Table 81
and lists if they are generated in SR OS.

Table 81: RADIUS CoA message [101] Error-Cause values

Code CoA Error Cause
201 Residual Session
Context Removed
202 Invalid EAP Packet
(Ignored)
401 Unsupported Attribute
402 Missing Attribute
403 NAS Identification
Mismatch
404 Invalid Request
405 Unsupported Service
406 Unsupported Extension
407 Invalid Attribute Value
501 Administratively
Prohibited
Page 240
provides an overview of the [101] Error-Cause attribute values as defined in RFC 5176
Residual Session Context Removed is sent in response to a
Disconnect-Request if one or more user sessions are no longer active,
but residual session context was found and successfully removed.
This value is only sent within a Disconnect-ACK and MUST NOT
be sent within a CoA-ACK, Disconnect-NAK, or CoA-NAK.
Invalid EAP Packet (Ignored) is a non-fatal error that MUST NOT be
sent by implementations of this specification.
Unsupported Attribute is a fatal error sent if a Request contains an
attribute (such as a Vendor-Specific or EAP-Message Attribute) that
is not supported.
Missing Attribute is a fatal error sent if critical attributes (such as
NAS or session identification attributes) are missing from a Request.
NAS Identification Mismatch is a fatal error sent if one or more NAS
identification attributes (see Section 3) do not match the identity of
the NAS receiving the Request.
Invalid Request is a fatal error sent if some other aspect of the
Request is invalid, such as if one or more attributes (such as EAP-
Message Attribute(s)) are not formatted properly.
Unsupported Service is a fatal error sent if a Service-Type Attribute
included with the Request is sent with an invalid or unsupported
value. This error cannot be sent in response to a Disconnect-Request.
Unsupported Extension is a fatal error sent due to lack of support for
an extension such as Disconnect and/or CoA packets.
This will typically be sent by a proxy receiving an ICMP port
unreachable message after attempting to forward a CoA-Request or
Disconnect-Request to the NAS.
Invalid Attribute Value is a fatal error sent if a CoA-Request or
Disconnect-Request contains an attribute with an unsupported value.
Administratively Prohibited is a fatal error sent if the NAS is
configured to prohibit honoring of CoA-Request or Disconnect-
Request packets for the specified session.
Description
7750 SR RADIUS Attributes Reference Guide
SR OS
No
No
No
Yes
Yes
Yes
Yes
No
Yes
Yes