Accounting On-Line Charging; Table 14: Accounting: On-Line Charging (Description) - Alcatel-Lucent 7750 Reference Manual

Accounting On-Line Charging

Accounting On-Line Charging

Table 14: Accounting: On-Line Charging (description)

Attribute ID Attribute Name
26-6527-95 Alc-Credit-Control-
CategoryMap
26-6527-96 Alc-Credit-Control-
Quota
Page 82
Refers to a pre-configured category-map (configure subscriber-mgmt
category-map <category-map-name>) that holds the credit-type (volume or
time) and information for maximum three pre-defined categories (for
example: category-names data in and out, video+data, etc.), their mappings to
individual forwarding queues/policers, out-of-credit-actions and alike. The
category-map-name can also be assigned via the ludb, or credit-control-policy
if the attribute is omitted. This attribute is ignored if the host has no credit-
control-policy defined in its sla-profile instance. Strings with length above the
Limits are treated as a setup failure.
Defines a volume and time quota per category in a pre-defined format. Either
volume OR time monitoring is supported and the operational credit-type
(volume or time) is taken from the category map if both volume and time-
quota in this attribute are non-zero. The operational credit-type becomes time
if the volume-quota is zero and volume if the time-quota is zero. The Credit
Expired becomes true and the corresponding Out Of Credit Action is triggered
if both time and volume-quota are zero in the initial Authentication-Accept or
CoA. Value zero for both time and volume-quota in additional Authentication
Accepts (triggered by credit refresh or re-authentication) are interpreted as no
extra credit granted and does not influence the current available credit, were
non-zero values reset the current available credit. For CoA requests both Alc-
Credit-Control-CategoryMap and Alc-Credit-Control-Quota attributes needs
to be included. For RADIUS-Access Accepts this is not mandatory and either
both or one of the two attributes can come from pre-defined values from the
node. Volume quota values outside the defined limits are treated as an error
condition. Time quota values above the defined limits are accepted and
capped at maximum value. If more attributes are present than allowed by the
limits, it is treated as a setup failure.
7750 SR RADIUS Attributes Reference Guide
Description