Application Assurance (Aa) Accounting; Table 65: Application Assurance Accounting (Description) - Alcatel-Lucent 7750 Reference Manual

Application Assurance (AA) Accounting

Application Assurance (AA) Accounting

Table 65: Application Assurance Accounting (description)

Attribute ID Attribute Name
1 User-Name
4 NAS-IP-Address
32 NAS-Identifier
40 Acct-Status-Type
44 Acct-Session-Id
49 Acct-Terminate-Cause
Page 214
The AA-subscriber reported in AA Accounting statistics and included in Start,
Interim and Stop Accounting messages. This attribute has the same content as
[26-6527-11] Alc-Subsc-ID-Str for AA RADIUS Accounting.
The identifying IP Address of the NAS requesting the Accounting and maps
to the ipv4 address from the system interface (configure router interface
system address <ip-address>). Allows to monitor node redundancy activity
switch.
A string (configure system name <system-name>) identifying the NAS
originating the AA Accounting requests. It is sent in all accounting messages.
Allows to monitor node redundancy activity switch.
Indicates AA Acct request type. Acct On is sent each time a RADIUS
accounting policy (configure application-assurance radius-accounting-
policy <rad-acct-plcy-name>) is enabled under a partition (configure
application-assurance group <aa-group-id:partition-id> statistics aa-sub
radius-accounting-policy <rad-acct-plcy-name>) or after a node reboot. An
Acct Start is sent for each new AA-subscriber created under a partition were
radius accounting is enabled. An Acct Interim will be sent every configured
interval time (configure application-assurance radius-accounting-policy
<rad-acct-plcy-name> interim-update-interval <minutes>) for each AA-
subscriber under a partition with the radius-accounting policy applied. An
Acct Stop is sent at AA-subscriber removal. An application-profile change or
an Application-Service-Options [ASO] override against a subscriber will not
trigger Acct Start/Stop messages and do not affect the AA RADIUS Acct
session.
Unique value per node used to identify the AA subscriber accounting session.
Reported in accounting Start, Stop and Interim Updates messages. Its value is
automatically derived from the subscriber ID string ([26-6527-11] Alc-Subsc-
ID-Str) and the AA subscriber type, that guarantees to preserve the subscriber
session ID after ISA card redundancy activity switch or after a node
redundancy activity switch (in AARP context). An activity switch will not
modify the session id, but can be detected if needed thanks to the [26-6527-
156] Alc-AA-Group-Partition-Isa-Id or the [32] NAS-Identifier. The AA
RADIUS Acct session is independent from the ESM RADIUS Acct session.
An AA Acct Off is sent when accounting stats is disabled (removing of
radius-acct policy)
Indicates how the session was terminated.
7750 SR RADIUS Attributes Reference Guide
Description