Alcatel-Lucent 7750 Reference Manual page 24

Subscriber Host Identification
Table 2: Subscriber Host Identification (description) (Continued)
Attribute ID Attribute Name
26-2352-99 RB-Client-NBNS-
Pri
26-2352-100 RB-Client-NBNS-
Sec
26-3561-1 Agent-Circuit-Id
26-3561-2 Agent-Remote-Id
26-3561-129 Actual-Data-Rate-
Upstream
26-3561-130 Actual-Data-Rate-
Downstream
26-3561-131 Minimum-Data-
Rate-Upstream
26-3561-132 Minimum-Data-
Rate-Downstream
Page 24
The IPv4 address of the primary NetBios Name Server (NBNS) for this
subscribers connection and maps to 'PPPoE IPCP option 130 Primary DNS
Server address or DHCPv4 option44 NETBIOS name server. Is an alternative
for 26-4874-6 ERX-Primary-Wins or 26-6527-29 Alc-Primary-Nbns.
The IPv4 address of the secondary NetBios Name Server (NBNS) for this
subscribers connection and maps to 'PPPoE IPCP option 132 Primary DNS
Server address or DHCPv4 option44 NETBIOS name server. Is an alternative
for 26-4874-7 ERX-Secondary-Wins or 26-6527-30 Alc-Secondary-Nbns.
Information describing the subscriber agent circuit identifier corresponding to
the logical access loop port of the Access Node/DSLAM from which a
subscriber's requests are initiated. Attribute is included/excluded based on
configure subscriber-mgmt authentication-policy/radius-accounting-policy
<name> include-radius-attribute circuit-id.
An operator-specific, statically configured string that uniquely identifies the
subscriber on the associated access loop of the Access Node/DSLAM. Attribute
is included/excluded based on configure subscriber-mgmt authentication-
policy/radius-accounting-policy <name> include-radius-attribute remote-
id.
The actual upstream train rate (coded in bits per second) of a subscriber's
synchronized DSL link and maps to values received during PPPoE discovery
(tag 0x0105) or DHCP (opt-82). Attribute is included/excluded based on
configure subscriber-mgmt authentication-policy/radius-accounting-policy
<name> include-radius-attribute access-loop-options.
Actual downstream train rate (coded in bits per second) of a subscriber's
synchronized DSL link and maps to values received during PPPoE discovery
(tag 0x0105) or DHCP (opt-82). Attribute is included/excluded based on
configure subscriber-mgmt authentication-policy/radius-accounting-policy
<name> include-radius-attribute access-loop-options.
The subscriber's operator-configured minimum upstream data rate (coded in bits
per second) and maps to values received during PPPoE discovery (tag 0x0105)
or DHCP (opt-82). Attribute is included/excluded based on configure
subscriber-mgmt authentication-policy/radius-accounting-policy
7x50_PRD_Multicast_MVPN_sender_receiver_only_v0.2.doc include-radius-
attribute access-loop-options.
The subscriber's operator-configured minimum downstream data rate (coded in
bits per second) and maps to values received during PPPoE discovery (tag
0x0105) or DHCP (opt-82). Attribute is included/excluded based on configure
subscriber-mgmt authentication-policy/radius-accounting-policy <name>
include-radius-attribute access-loop-options.
7750 SR RADIUS Attributes Reference Guide
Description