Alcatel-Lucent 7750 Reference Manual page 146

Enhanced Subscriber Management (ESM) Accounting
Table 52: Enhanced Subscriber Management Accounting (description) (Continued)
Attribute ID Attribute Name
30 Called-Station-Id
31 Calling-Station-Id
32 NAS-Identifier
40 Acct-Status-Type
41 Acct-Delay-Time
Page 146
Allows the NAS to send in an Access Request and/or Accounting Request
information with respect to the user called. Attribute is omitted in
authentication/accounting via: configure subscriber-mgmt authentication-
policy/radius-accounting-policy <name> include-radius-attribute no
called-station-id.
Supported applications:
• LNS: The content is the string passed in the [21] Called Number AVP of
the L2TP ICRQ message.
• WLAN Gateway: Reflects the currently learned AP-MAC and SSID.
These can be learned via EAP, DHCP (opt82), DHCPv6 LDRA
(interface-id) or arp-over-GRE.
Allows the NAS to send unique information identifying the user who
requested the service. This format is driven by configuration (configure
subscriber-mgmt authentication-policy/radius-accounting-policy <name>
include-radius-attribute calling-station-id <llid|mac|remote-id|sap-id|sap-
string>). The LLID (logical link identifier) is the mapping from a physical to
logical identification of a subscriber line and supplied by a RADIUS llid-
server. The sap-string maps to configure service <service-id> subscriber-
interface <ip-int-name> group-interface <ip-int-name> sap <sap-id>
calling-station-id <sap-string>. A [31] Calling-Station-Id attribute value
longer than the allowed maximum is treated as a setup failure. The attribute is
omitted in authentication/accounting via configure subscriber-mgmt
authentication-policy/radius-accounting-policy <name> include-radius-
attribute no calling-station-id.
For DSM the Calling-Station-Id is always equal to the remote-id if present and
the UE MAC address otherwise.
A string (configure system name <system-name>) identifying the NAS
originating the Authentication or Accounting requests and sent when nas-
identifier is included for the corresponding application: configure
subscriber-mgmt authentication-policy (ESM authentication), configure
subscriber-mgmt radius-accounting-policy (ESM accounting), configure
aaa isa-radius-policy (LSN accounting, WLAN-GW) and configure aaa
l2tp-accounting-policy (L2TP accounting).
Indicates whether this Accounting-Request marks the beginning of the user
service (Start) or the end (Stop) or reports interim updates.
Indicates how many seconds the client has been trying to send this accounting
record for. In initial accounting messages this attribute is included with value
0 for ESM and omitted for DSM. Attribute is omitted in accounting via
configure subscriber-mgmt radius-accounting-policy <name> include-
radius-attribute no acct-delay-time.
7750 SR RADIUS Attributes Reference Guide
Description