Alcatel-Lucent 7750 Reference Manual page 21

Table 2: Subscriber Host Identification (description) (Continued)
Attribute ID Attribute Name
95 NAS-IPv6-
Address
97 Framed-IPv6-
Prefix
7750 SR RADIUS Attributes Reference Guide
The identifying IP Address of the NAS requesting the Authentication or
Accounting. Included when the RADIUS server is reachable via IPv6.
The address is determined by the routing instance through which the RADIUS
server can be reached:
"Management" — The active ipv6 address in the Boot Options File (bof
address <ipv6-address>).
"Base" or "VPRN" — The ipv6 address of the system interface (configure
router interface system ipv6 address <ipv6-address>).
The address can be overwritten with the configured ipv6-source-address
(configure aaa radius-server-policy <policy-name> servers ipv6-source-
address <ipv6-address>).
ipv6-prefix/prefix-length to be configured via SLAAC (Router Advertisement)
to the WAN side of the user. Any non /64 prefix-length for SLAAC host
creation is treated as a session setup failure for this host. This attribute is an
alternative to [100] Framed-IPv6-Pool and [26-6527-99] Alc-IPv6-Address,
which assigns IPv6 addressing to the wan-side of a host via DHCPv6 IA-NA.
Attribute is also used in CoA and Disconnect Message (part of the ESM or AA
user identification-key). Attribute is omitted in accounting via configure
subscriber-mgmt radius-accounting-policy <name> include-radius-
attribute no framed-ipv6-prefix.
RADIUS Attributes Reference
Description
Page 21