IPSec Tunnel Identification Attributes
IPSec Tunnel Identification Attributes
Table 79
multiple IKEv2 remote-access tunnel(s).
Table 79: Disconnect Message: IPSec Tunnel Identification Attributes
ID method
1. Only one of the three identification methods should be used in a Disconnect Request, otherwise
2. If there are multiple tunnels having the specified IDi, then all these tunnels will be terminated.
Page 236
details the different attributes that can be used in a Disconnect Message to identify one or
Attribute ID
1
1
87
26-6527-61
8
97
2
44
3
1
the system will reject it by sending a Disconnect-NAK with [101] Error-Cause value set to 404
(Invalid Request).
Attribute Name
NAS-Port-Id
NAS-Port-Id+
Alc-IPsec-Serv-Id
+
a single IP Address
or IPv6 Prefix
attribute
Alc-IPSec-Serv-Id
Framed-IP-
Address
Framed-IPv6-
Prefix
Acct-Session-Id
User-Name
7750 SR RADIUS Attributes Reference Guide
Notes
Identifies
Single IPSec
Tunnel
—
Single IPSec
Tunnel for a given
public service
—
All IPSec Tunnels
with the User-
Name as the IDi
2