Modifying Lgmp Clients Per Vlan Using The Cli; Enabling/Viewing Cisco Group Management Protocol (Cgmp Snooping; Cgmp Snooping Dialog Box - Avaya Cajun P550R User Manual

Modifying
LGMP Clients
Per VLAN Using
the CLI
Enabling/Viewing Cisco Group Management
Protocol (CGMP) Snooping
Enabling/
Viewing CGMP
Snooping Using
the Web Agent
Cajun P550/P880/P882 Switch User Guide
To modify LGMP clients per VLAN using the CLI, enter the following
command in Configure mode:
cajun(configure)# set lgmp client config <options>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
You can enable CGMP snooping using either the web agent or the
CLI.
To enable CGMP snooping and view its statistics using the web
agent:
1. Select CGMP Snooping from the L2 > Intelligent Multicast
group on the web agent window. The CGMP Snooping dialog
box opens (Figure 16-14).
*Note: You must enable intelligent multicasting on a
global basis activate CGMP snooping
configuration.
Figure 16-14. CGMP Snooping Dialog Box
Managing Intelligent Multicasting
16-33