Input Terminal State Monitor (R144); Output Terminal State Monitor (R145); Operation Status Monitor (R146) - Panasonic AAD03011 Instruction Manual

Input terminal state monitor (R144 )
It indicates the states of the control terminals No. 1 to 7 and phase A and B of the encoder input.
Relay No.
R1440 OPEN signal input state
R1441 CLOSE signal input state
R1442 OPEN arrival signal input state
R1443 CLOSE arrival signal input state
R1444 Safety sensor signal input state
R1445 OPEN speed change input state
R1446 CLOSE speed change input state
R1447 Encoder phase A signal input state
R1448 Encoder phase B signal input state
Output terminal state monitor(R145 )
It indicates the output states of RY output terminal.
Relay No.
R1450 RY1 output signal
R1451 RY2 output signal
R1452 RY3 output signal
Operation status monitor(R146 )
It indicates the operation status of the inverter.
Relay No.
R1460 Run signal (RUN)
R1461 Reverse run signal (REV)
R1462 Arrival signal(FR-ARV)
R1463 Overload alarm (OL)
R1464 OPEN arrival signal (OP-ARV)
R1465 CLOSE arrival signal (CL-ARV)
R1466 Obstacle detection signal
R146F Fault alarm
Name
1: Terminal is ON (closed).
0: Terminal is OFF (opened).
Name
1: RY output signal is ON (energized).
0: RY output signal is OFF (not energized).
Name
1: Runs
0: Stops
1: Reverse operation runs.
0: Stops or forward operation runs.
1: It is turned ON.
0: It is turned OFF.
1: Fault state
0: Normal state
Details
Details
Details
81