Parts Identification 13 - Panasonic AAD03011 Instruction Manual

Operation panel
Warning label
Terminal
cover
Main circuit wire
lead-in hole
Heat sink fins
Mounting hole
[Accessory]
Communication terminal block (1 pc)
Note) Turn off the power supply and remove the communication terminal cover before
installing/ removing the communication terminal block. When the communication
function is not used, the communication terminal cover should be fitted.
[Details on model]
Input power
supply
Single-phase
200V
Parts Identification
Control wire lead-in hole
Applicable motor
capacity (kW)
0.4
Mounting hole
Communication
terminal cover
Rating
nameplate
Check the rating nameplate to confirm
that the ordered product has been
delivered.
Brake resistor
Note) The brake resistor is built into the
inverter with brakes only.
(Built into the heat sink fin section.)
With brakes
AAD03011G
Frame
Model
Without brakes
AAD03011D
13