Custom Mode; Function Setting Mode; Function Setting Mode For Door Control - Panasonic AAD03011 Instruction Manual

[Continued from previous page]

Custom mode

Function parameter data distributed to
custom
parameter No. can be set,
changed or confirmed.
Set the required No. with the
‹buttons.
[Display parameter No.]
[Display set parameter No.]
Press the SET button to confirm the
parameter set currently.

Function setting mode

The parameter data can be changed and
monitored in this mode. The parameter No.
is displayed when this mode is entered.
Set the required No. with the
buttons.
In addition, password can be set.
[Display parameter No.]
[Display password]

Function setting mode for door control

The parameter data for door control can be
changed and monitored in this mode.
The parameter No. is displayed when this
mode is entered.
Set the required No. with the
In addition, password can be set.
[Display parameter No.]
[Display password]
Password can be set with Parameter P41: P region password and
Parameter d53: D region password.
and
Continuously
press
U 0 1
P. 0 1
and
P 0 1
P. P S
and buttons.
d 0 1
d. P S
After the parameter set currently
is confirmed,
The data of the parameter can
be changed when SET button
is pressed.
The distributed parameter No.
can be changed when the SET
button is held down.
(P region and d region can be
distributed.)
The current parameter No.
will appear when the MODE
button is pressed.
(The data is not set.)
[Data change]
The data can be changed with
the and buttons.
Press the SET button and set the
changed data.
(The next parameter No. will appear
when the SET button is pressed.)
The current parameter No. will
appear when the MODE button
is pressed.
(The data is not set.)
[Data change]
The data can be changed with
the and buttons.
Press the SET button and set the
changed data.
(The next parameter No. will appear
when the SET button is pressed.)
The current parameter No. will
appear when the MODE button
is pressed.
(The data is not set.)