Explanation of Inside of Terminal Cover
Control circuit terminal
block (Relay output)
Earth terminal
Mounting hole
Brake resistor
connecting terminal block
Opening and Closing Terminal Cover
Opening the terminal cover
Lightly push up the cover bottom edge of the terminal cover.
Closing the terminal cover
Lightly push down the center top edge of the terminal cover.
Note) After closing the terminal cover, confirm that it is securely closed.
14
Note) This explanatory drawing shows
Main circuit terminal block
Communication circuit terminal block
(RS485 communication)
Control circuit terminal block
(Input and output signal)
the state with the terminal cover
removed. During normal use, do
not remove the terminal cover.