Mounting - Siemens S120 Manual

Hide thumbs Also See for S120:

Table of Contents

Mounting

Damage when using the BOP

The interface for the BOP20 on the CU310-2 may be damaged when the BOP20 is used.

• Make sure that you insert and withdraw the BOP20 straight into/out of the CU310-2 and

The diagrams show how to mount the Basic Operator Panel BOP20 on a CU310-2.

To remove the blanking cover,

press the latching cams of the

cover together simultaneously and

pull the cover straight out.

Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4

that it is not tilted up or down.

Press the latching cams on the

BOP20 together simultaneously

and push the BOP20 straight

into the housing of the CU310-2

until you hear it latch into

Control Units, Control Unit Adapters and operating components

7.8 Basic Operator Panel BOP20

CU310-2 with mounted BOP20.