Motor Connection; Safe Brake Relay Connection - Siemens S120 Manual

Note
To connect the cable lugs of the brake resistor cable to a PM340 Power Module frame size
FSA it is necessary to nip the lug on connection R2 off using a diagonal cutter tool. Take
great care to ensure that no pieces of plastic fall into the housing.
4.3.3.5

Motor connection

Table 4- 19 Terminal block, motor connection
4.3.3.6

Safe brake relay connection

Table 4- 20 Plugs
Terminal
1
2
Note
For further information, see Section Option module Safe Brake Relay (Page 378).
AC Drive
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
Terminal
U2
V2
W2
Designation
Low
High
4.3 Power Modules Blocksize (PM340)
Technical data
PE connection
Motor phase U
Motor phase V
Motor phase W
Technical data
Low-signal safe brake relay to PM340
High-signal safe brake relay to PM340
Power Modules
133