Control Units, Control Unit Adapters and operating components
7.8 Basic Operator Panel BOP20
Note
The BOP20 may be inserted or withdrawn while the Control Unit is operational.
Removal
1. Simultaneously press the latching cams on the BOP20.
2. Keep the latching cams pressed together and pull the BOP20 straight out.
3. Insert the blanking cover.
Display and operator controls of the BOP20
For information about display and operator controls of the BOP20, refer the SINAMICS S120
Commissioning Manual.
338
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
AC Drive