Memory Card - Siemens S120 Manual

7.4.2.17

Memory card

Inserting the memory card
Use only memory cards manufactured by Siemens to run the CU310-2 DP.
Insert the memory card into the CU310-2 DP so that the arrow on the card's label (on the
left, next to the word Siemens) points to the arrow on the device.
Figure 7-12
The memory card in a faulty CU310-2 DP
If you are returning a faulty CU310-2 DP to Siemens, remove the memory card and keep it in
a safe place.
This ensures that all your saved data (firmware, licenses, parameters) will be available to
you immediately again to commission a replacement unit.
AC Drive
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
Control Units, Control Unit Adapters and operating components
CU310-2 DP Inserting the memory card
7.4 Control Unit CU310-2 DP (PROFIBUS)
307