4.4
Installing the memory card
Memory card is generally pre-installed. If unit does not have one, follow these steps to install
the card:
Procedure
Damage from electrostatic discharge (ESD)
Some components in the device (such as communication cards, or memory cards) are
sensitive to electrostatic discharge and could be damaged. Be sure to handle such
components in a manner that avoids any potential damage due to ESD.
1. Disconnect power to the device.
2. Align card with memory card holder.
3. Press into place.
For location of card holder see illustration in Accessing wiring compartment (Page 34).
4.5
Disassembly
Incorrect disassembly
Injury through electric shock may result from incorrect disassembly.
In order to disassemble correctly, observe the following:
• Before starting work, make sure that you have switched off all physical variables such as
• Secure the remaining connections so that no damage can result if the process is started
SITRANS LT500 with ultrasonic transducer inputs
Compact Operating Instructions, 02/2024, A5E52021877-AA
CAUTION
WARNING
pressure, temperature, electricity etc. or that they have a harmless value.
unintentionally.
Installing/mounting
4.4 Installing the memory card
27