Auto Time Stamp - NEC univerge sv8100 User Manual

Description
After a Subscriber Mailbox user listens to a message, VM8000 InMail can optionally
announce the time and date the message was left. The Subscriber can enable Auto
Time Stamp from their mailbox, or you can optionally enable in from system
programming. Auto Time Stamp helps if the subscriber needs to know the time and
date of each message they receive without taking any extra steps. With Auto Time
Stamp turned on, InMail automatically announces the date, time, and (optionally) the
caller's number at the end of each message. With Auto Time Stamp turned off, the
subscriber must dial
Related Features
Mailbox Options Menu
Time and Date
Time and Date Stamp
Programming
1.
2.
InMail System Guide
TI (84)
Auto Time Stamp is available on the Mailbox Options Menu.
InMail uses the VM8000 InMail Time and Date.
An extension can listen to a message and dial a code to hear the time the message was
sent.
Enable Auto Time Stamp from your Subscriber Mailbox.
Refer to Operation on page
.
Optionally Enable Auto Time Stamp from System Programming.
47-02-11

Auto Time Stamp

Enter 1 (Yes) to enable Auto Time Stamp.
By default, Auto Time Stamp is disabled (0).
.
while listening to a message to get the same information.
2-64.
Auto Time Stamp
Issue 7.00
2 - 63