NEC univerge sv8100 User Manual page 239

Programming
No additional programming required.
Operation
To leave a message in the mailbox of an unanswered extension:
1.
2.
To leave a message in a mailbox:
1.
To leave a message in an extension mailbox, you can be:
InMail System Guide
Press Message.
Leave message and hang up.
OR
Leave message and dial # .
#
Dialing sends the message and hangs up.
.
Leaving a Message from Outside the Company
Leave message and hang up.
OR
Leave message and dial # .
Dialing # may provide you with additional dialing options. This depends on how the called
.
mailbox's Next Call Routing Mailbox is set up.
Transferred to an extension mailbox by another user.
Automatically routed to a mailbox when the called party does not answer or is unavailable.
Sent to the mailbox from the Automated Attendant after dialing * plus the called party's mailbox
number.
Routed from the Automated Attendant after dialing a uniquely programmed digit set up to send you
to an extension's mailbox.
Leaving a Message for a Coworker
Issue 7.00
2 - 231