NEC univerge sv8100 User Manual page 476

Issue 7.00
47-19: POP3 Login Setup for Email Notification
Options
• Email Notification requires software version 03.10 or higher and a
Description
Options
3 - 468
Use this option to set up the POP3 Login options for Email Notification (if
required). To use POP3 Login, program 47-18-05 must be set to 2 (POP3
Authentication enabled).
47-19-01: POP3 Server Name
Use this option to enter the name of the POP3 server that will handle email
delivery for the installation site. The POP3 server name is typically similar to
pop.emailserver.com. If you didn't make an entry in the 90-11-11 and 90-11-
12 Domain Name options, this entry must be the IP address of the POP3
server since there is no way to resolve a name. There is one entry per
system.
Options
characters maximum.
48
Default
No entry.
47-19-02: POP3 Port Number
Use this option to specify the port (logical connection) the installation site's
email server uses for POP3. Normally, this is port 110 (which is preassigned
by the IANA as the "Well-Known TCP Port Number" for POP3).
Options
using 0-9, 4 max.
Digits
Default
110
47-19-03: POP3 Encryption Method
Use this option to enable or disable POP3 SSL encryption for the site's
email server. The option you choose depends on the requirements of the
POP3 email server. Check with the server administrator or Internet Service
Provider (ISP) for more.
Memory Expansion Daughter Board .
Programming