NEC univerge sv8100 User Manual page 400

Issue 7.00
47-01 Program Entry
Speaker + #*#* + Password (12345678) + Transfer + 4701 + Option.
DSPDB VM Type (0=InMail, 1=VRS) [0]
01
LK1=InMail, LK2=VRS
InMail Master Name (See
02
Subs Msg Length (1~4095) [120]
03
Mbox Msg Length (1~4095) [120]
04
Msg Bkup/Adv Time (1~60) [5]
05
Fax Extension (Extension number or no entry, entered by pressing Hold) [No entry]
06
Pager CBack (Digits, M=Number of messages, X=Extension number) [X*M#]
07
LK1=M, LK2=X
Pager Dial Delay (0~99) [9]
08
Notify Pager Intvl (1~255) [15]
09
Notify N-Pgr intvl (1~255) [20]
10
Notify Busy Intvl (1~255) [15]
11
Notify RNA Intvl (1~255) [30]
12
Notify RNA Rings (1~99) [5]
13
Notify Call Attmpt (1~99) [5]
14
Retry Until Ack (1=Yes - enabled, 0=No - disabled) [0]
15
Name Format (0=First-Last, 1=Last-First) [0]
16
Press this: To do this:
Enter (accept) data you entered and advance to the next prompt, or advance to the next
Transfer
prompt without changing your entry.
Scroll backwards (-1) or forwards (+1) through the list of available entries.
-1 +1
When editing an entry, moves the cursor left or right.
When editing an entry, delete the character to the left of the cursor.
Conf
When editing an entry, Hold erases the entire entry from the display.
Hold
Where indicated, press a line key to enter a specific value for the selected option.
Line Keys (LK)
Backs up to the previous level (e.g., from Option to Series, or from Series to Program).
Answer
Scroll consecutively backwards or forwards through selected Option or Series.
3 - 392
47-01 InMail System Options Program Entry
(Entry Range) [Default Setting]
Keys for Entering Names on page
Editing
Navigation
3-385) [InMail ##]
Programming