NEC univerge sv8100 User Manual page 182

Issue 7.00
Related Features
Automated Attendant
Dial Action Table
Instruction Menu
Programming
1.
Operation
For the outside caller:
After Automated Attendant answers, the voice prompts will instruct you on which digits to dial.
2 - 174
The Automated Attendant can automatically answer the telephone system's incoming
calls, play an Instruction Menu message, and provide dialing options to callers.
The GOTO action is a Dial Action Table option.
Be sure the Instruction Menu for the active Call Routing Mailbox describes how to use the
GOTO action.
Assign a GOTO action to the active Dial Action Table.
47-13-01 Dial Action Table Actions: GOTO Action - Go to Mailbox (7) (GOTO)
To have Automated Attendant callers dial a single digit to go to a Call
Routing or Announcement Mailbox, enter the mailbox number in the
corresponding Number option.
For example, to have key 1 go to Call Routing Mailbox 2, for key 1 enter
GOTO for the Action and 2 for the corresponding Number.
To have InMail require Automated Attendant callers to enter a Call Routing
or Announcement Mailbox to go to, enter XXX in the corresponding Number
option. The key you choose must represent the first digit in the mailbox
numbers.
For example, to allow callers to go to mailboxes 1~16, for key 0 enter
GOTO for the Action and XXX for the corresponding Number.
To log into any valid Call Routing or Subscriber Mailbox, enter IXXX in the
corresponding Number option.
For example, to allow callers to dial 1 plus any Call Routing or
Announcement Mailbox number to go to, for key 1 enter GOTO for the
Action and IXXX for the corresponding Number.
By default, there are no GOTO actions assigned.
.
Using the Automated Attendant GOTO Action
Features