Single Digit Dialing - NEC univerge sv8100 User Manual

Description
An Automated Attendant caller can press a single key to route to an extension, route
to another destination, or use an InMail feature. Single Digit Dialing simplifies the
Automated Attendant since the caller dials a single digit to reach an extension or use
an option. If you set up Single Digit Dialing, be sure to customize the active Instruction
Menu so it describes which digits the caller should dial to use the available options.
All of the features in the following Dial Action Table Key Action Summary table are
accessible from a single Dial Action Table digit.
Action
LOGON
Hang Up
GOTO
InMail System Guide
Dial Action Table Key Action Summary
Screened Transfer (1)
Allows an Automated Attendant caller to place a
TRF
Screened Transfer to an extension. InMail calls (screens)
the destination to see if the call can go through.
Unscreened Transfer (2)
Allows an Automated Attendant caller to place an
UTRF
Unscreened Transfer to an extension.InMail transfers the
call the destination and then hangs up.
Quick Message with Greeting (3)
Allows an Automated Attendant caller to leave a Quick
REC1
Message at an extension. The caller hears the
extension's personal greeting.
Quick Message without Greeting (4)
Allows an Automated Attendant caller to leave a Quick
REC2
Message at an extension. The caller does not hear the
extension's personal greeting.
Log On to Voice Mail (5)
Allows an Automated Attendant caller to log on to a
mailbox, either directly or one of their choosing.
Hang Up (6)
InMail says "Goodbye" and hangs up.
Go to a Mailbox, (7)
Allows an Automated Attendant caller to route to another
mailbox.
Undefined Routing (0)
UND
This action provides no routing.

Single Digit Dialing

Description
Issue 7.00
Feature
Reference
Screened Transfer
on page 2-327
Unscreened
Transfer on page
2-355
Quick Message on
page 2-313
Quick Message on
page 2-313
Log On to Voice
Mail on page
2-239
Hang Up on page
2-193
Go To A Mailbox
on page 2-173
Not applicable
2 - 333