Changing The Time; Room Monitor - NEC SV9100 User Manual

CHANGING THE TIME

BARGE IN (INTERRUPTA

ROOM MONITOR

V5
Note – Must be done from reception or main handset
Leave Handset Down
Press Speaker

Dial 728

two digits for the hour (24 hour)
Dial

Dial two digits for the minutes

Press Speaker to hang up

NOTE:
The date can only be set / changed in system programming
CALL)*Note - Must
be activated in programming
Lift Handset

Dial 710

Busy Extension
Dial

Room monitor lets an extension listen to the sounds in co-workers area, for
example, a receptionist could listen for sounds in the warehouse when it's
left unattended.
NOTE:
(A Room monitor key must be programmed. Room monitor must be
activated at the extension initiating the monitor and at the extension that is to be
monitored. You can only listen to one extension at a time.)
To activate Room Monitor from initiating extension:
Room Monitor key
Press

Extension numberyou are at
Dial

(You can place and answer calls whilst monitor is active)
To activate Room Monitor from extension to be monitored:
Press Room Monitor key

Dial Extension number you are at

(The extension user will hear a warning tone).
9