Section 2 Requirements - NEC univerge sv8100 User Manual

Hide thumbs Also See for univerge sv8100:
Table of Contents

Advertisement

1.
Does the site's SMTP email server require POP3 Login?
InMail System Guide
Setting Up POP3 Login
If yes:
1.
47-18-05: SMTP A
To enable POP3 Authentication, enter 2 .
By default, this option is disabled (0).
47-19-01: POP3 S
Enter the name of the POP3 server that will handle email delivery for
the installation site. The POP3 server name is typically similar to
pop.emailserver.com.
- If you didn't make an entry in the 90-11-11 and 90-11-12
Domain Name options, this entry must be the IP address of the
POP3 server since there is no way to resolve a name.
By default, there is no entry for this option.
47-19-02: POP3 P
Specify the port (logical connection) the installation site's email server
uses for POP3. Normally, this is port 110.
By default, this option is 110.
47-19-03: POP3 E
Enable or disable POP3 SSL encryption for the site's email server.
The option you choose depends on the requirements of the POP3 email
server.
By default, this option is disabled (0).
47-19-04: POP3 U
Enter the POP3 account's user name. If the subscriber's email
address is yourname@emailserver.com, the username would nor-
mally be yourname.
By default, there is no entry for this option.
47-19-05: POP3 P
Enter the password for the account specified in the previous option.
When authentication is enabled, this password is required to log onto
the email account.
By default, there is no entry for this option.
If no:
2.
47-18-05: SMTP A
To disable POP3 Authentication, enter either 0 (Authentication dis-
abled) or 1 (SMTP Authentication enabled).
By default, this option is disabled (0).
UTHENTICATION
N
ERVER
AME
N
ORT
UMBER
M
NCRYPTION
ETHOD
SERNAME
ASSWORD
UTHENTICATION
Issue 7.00
2 - 141

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents