NEC univerge sv8100 User Manual page 162

Issue 7.00
Related Features
Automated Attendant
Routing Mailbox
Dial Action Table
Park and Page/Auto Attendant Direct to Voice Mail
Programming
1.
2 - 154
settings by the day of the week.
The Automated Attendant can automatically answer the telephone system's incoming
calls, play an Instruction Menu message, and provide dialing options to callers.
The mailbox associated with an Answer Table that specifies which dialing options (Dial
Action Table) and announcements are available to Automated Attendant callers.
Defines the dialing options for the Call Routing Mailbox chosen by the active Answer
Table.
Defines the park and page and auto attendant do not disturb settings.
Determine which Answer Table answers each trunk.
47-10-01 Answer Table Assignment (Answer Table)
For each trunk, enter the number of the Answer Table that handles that
trunk's Automated Attendant calls. See
By default, all trunks use Answer Table 1.
.
14-01-13: Basic Trunk Data Setup - Trunk-to-Trunk Transfer
Use this option to enable or disable loop supervision for the trunk. For each
trunk that should be able to participate in a tandem call, enter 1.
20-11-14: Class of Service Options (Hold/Transfer Service) - Trunk-to-Trunk
Transfer
Use this option to turn off or on the Trunk-to-Trunk Transfer Restriction
option. If enabled, trunk-to-trunk transfer is not possible.
20-11-21: Class of Service Options (Hold/Transfer Service) - Restriction for
Tandem Trunking on Hang Up
Use this option to allow or deny an extension user's ability to set up a
tandem/conference call automatically when they hang up.
Answer Tables on page 2-47.
Features