NEC univerge sv8100 User Manual page 130

Issue 7.00
Dialing Options Available while Entering a Name
The following table shows the dialing options available to the caller while they are
entering a name into a Directory Dialing Mailbox.
Dialed
Timeout
2 - 122
By default, the caller can dial the digits 2~9 to enter the name or dial # to return
to the Automated Attendant.
If a Next Call Routing Mailbox is specified, the caller can dial the digits 2~9 to
enter a name, dial 0 to follow the 0 action of the Next Call Routing Mailbox, or
dial # to route directly to the Next Call Routing Mailbox.
Directory Dialing Mailbox Name Entry Options
(Options available while entering a name)
47-14-08 or 47-15-08:
Next Call Routing
Digit
Mailbox Setting
Not applicable
1
Not applicable
2~9
UND (Not assigned)
0
1-32 (valid Call Routing
Mailbox)
Not applicable
*
UND (Not assigned)
#
1~32 (valid Call Routing
Mailbox)
UND (Not assigned)
Action
Entry is ignored.
Interprets the digit as a letter and waits about 20
seconds for additional input (i.e., more letters or a
# to conclude name entry). If no additional digits
are dialed for 10 seconds, the Directory Dialing
Message repeats and then InMail hangs up.
Repeats the Directory Dialing Message (to make
a new name entry) each time the caller dials the
digit.
Caller routes according to the 0 action of the Next
Call Routing Mailbox's Dial Action Table.
Repeats the Directory Dialing Message (to make
a new name entry) each time the caller dials the
digit.
Routes to the Automated Attendant (i.e., back to
the Call Routing Mailbox that initially answered
the call).
Routes to the Next Call Routing Mailbox and
plays that mailbox Instruction Menu.
Repeats the Directory Dialing Message (to make
a new name entry) up to two times and then
hangs up.
Features