NEC univerge sv8100 User Manual page 126

Issue 7.00
3.
4.
5.
Unscreened Transfer
Screened Transfer
2 - 118
47-14-03 Extension Name Match (Name Match)
Select the portion of the extension name on which the Directory Dialing
Mailbox should route. Enter 0 for first; 1 for last. This option allows for dial-
by-first-name and dial-by-last-name Directory Dialing.
For example, if 47-01-16 Name Format is 0 and the name in 15-01-01
Extension Name is entered as first name followed by last name, enter 1 in
this option to set up last name dialing.
By default, the Directory Dialing Mailbox routes on the first portion of the name
.
(0).
Set up Directory Lists to control which extensions Directory Dialing can access.
47-02-15 Directory List (Directory List)
Select the Directory List to which the extension belongs. The entries are
1~8 (for lists 1~8), 0 (for no list), or * (for all lists). Directory Dialing to the
extension can occur only if the list entry matches the setting in 47-14-02
Directory List Number to Use for the Directory Dialing Mailbox.
By default, extensions are not included in a Directory List (0).
.
47-14-02 Directory List Number to Use (Directory List)
The Directory Dialing Mailbox can route calls only to the members of the
Directory List specified in this option. The entries are 1~8 (for lists 1~8).
By default, the Directory Dialing Mailbox uses list 1.
.
How many letters of the employee's name must the caller dial?
47-14-01 Minimum Number of Letters Required (Min Num Letters)
Specify how many letters of an employee's name the caller must dial to use
Directory Dialing. If the caller dials less than the specified minimum number
of letters, InMail cannot route the call. The entries are 1~3 (1~3 letters).
By default, callers must dial at least 1 letter of the employee's name (1).
.
Specify the call routing as a Screened or Unscreened Transfer when Directory
Dialing finds a name match.
47-14-04 Unscreened or Screened Transfer (Transfer Option)
Enter 1 to route the call as an Unscreened Transfer.
By default, InMail routes the call as a Screened Transfer (0).
.
47-14-04 Unscreened or Screened Transfer (Transfer Option)
Enter 0 to route the call as a Screened Transfer.
By default, InMail routes the call as a Screened Transfer (0).
.
Features