NEC univerge sv8100 User Manual page 103

Hide thumbs Also See for univerge sv8100:
Table of Contents

Advertisement

InMail System Guide
notification destination.
Entries
0 = Disabled
1 = Enabled
Default = 0
47-06-21
All Message Notification Enabled (Group mailbox)
Use this option to enable or disable notification for the group mailbox. If
disabled, enabling the individual notification entries has no effect.
Entries
0 = Disabled
1 = Enabled
Default = 1
47-06-26
Group Mailbox Message Notification Options - Queuing.
Use this option to enable or disable Message Notification queuing. If
enabled, Message Notification is stored in queue when there is no active
notification destination.
Entries
0 = Disabled
1 = Enabled
Default = 0
47-20-01
Station Mailbox Message Notification Options - Notification
For the selected entry (1-5), use thisption to enable or disable Message
Notification. If enabled, notificationill occur when the mailbox receives a
new message according to the settings for Type, Start Hour, End Hour, and
notification Phoneumber. If disabled, Message Notification will not occur.
There are five separately programmed Message notification entries for
each Subscriber Mailbox.
Entries
0 = Disabled
1 = Enabled
Default = 1
47-20-02
Station Mailbox Message Notification Options - Notification Begin
Hour
For the selected entry (1-5), use this option to set the hour when
MessageNotification will start. Notification will occur only for new messages
received between this setting and the End Hour setting. This entry is in 24-
hour (military time). For example, 08 is 8:00 AM and 20 is 8:00 PM. For 24-
hour notification, make the Start Hour the same as the End Hour.
There are five separately programmed
Message notification entries for each Subscriber Mailbox.
Issue 7.00
2 - 95

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents