NEC univerge sv8100 User Manual page 439

47-11 InMail Answer Table Options
Description
Use 47-11 InMail Answer Table Options to set options for the Answer Tables. InMail
provides 8 Answer Tables (1~8). To set up the schedules for each Answer Table, go to
47-12 InMail Answer Table Schedule.
.
Options
InMail System Guide
See Answer Tables on page 2-47
47-11-01 Answer Schedule Override (Schedule Override)
Use this option to enable or disable Answer Schedule Override for the
selected Answer Table. If enabled and you make an entry for Override
Mailbox below, the active Answer Table routes calls to the Override
Mailbox.
See Answer Schedule Override on page 2-43
.
Options
1 (Yes - Use 47-11 InMail Answer Table Options)
Default
0 (No - Use 47-11 InMail Answer Table Options)
47-11-02 Override Mailbox Category (Override MB Ctg)
Use this option to specify the category of the mailbox to which Automated
Attendant calls should route when you enable Answer Schedule Override.
InMail mailbox categories are Subscriber Mailbox, Group Mailbox, and
Routing Mailbox.
InMail handles the routing according to the type of mailbox (Subscriber, Call
Routing, or Announcement) within the specified category:
If the Override Mailbox is a Station Mailbox, the outside caller hears the
mailbox greeting (if recorded) and can leave a message.
If the Override Mailbox is an Announcement Mailbox, the outside caller
hears the recorded announcement. Depending on how the Announcement
Mailbox is programmed, InMail then hangs up, reroutes the call, or provides
additional dialing options.
If the Override Mailbox is a Call Routing Mailbox, the outside caller hears
the instruction menu and can dial any option allowed by the associated Dial
Action Table.
If the Override Mailbox is a Directory Dialing Mailbox, the outside caller can
reach an extension by dialing the first few letters in the extension user's
for more information.
Issue 7.00
for more.
3 - 431