Baldor NextMove ESB-2 Installation Manual page 9

Included with NextMove ESB-2 is the Mint Motion Toolkit CD. This contains a number of
utilities and useful resources to get the most from your Mint controller. These include:
Mint WorkBench

This is the user interface for communicating with the NextMove ESB-2.
PC Developer Libraries

Installing Mint WorkBench will install ActiveX interfaces that allow PC applications to be
written that communicate with the NextMove ESB-2.
This manual is intended to guide you through the installation of NextMove ESB-2.
The chapters should be read in sequence.
The Basic Installation section describes the mechanical installation of the NextMove ESB-2.
The following sections require knowledge of the low level input/output requirements of the
installation and an understanding of computer software installation. If you are not qualified in
these areas you should seek assistance before proceeding.
Note: You can check that you have the latest firmware and Mint WorkBench releases
by visiting the website www.baldormotion.com.
Servo Systems Co. • 115 Main Road • P.O. Box 97 • Montville, NJ,
2-2 Introduction
07045-0097 • (973) 335-1007 • Toll Free: (800) 922-1103
Fax: (973) 335-1661 • www.servosystems.com
www.baldormotion.com
MN1957