Ip Ranges Sub-Panel - M86 Security M86 User Manual

SR R M A S C 1: G , P M
EPORT ANAGER DMINISTRATION ECTION HAPTER ROUP ROFILE ANAGEMENT

IP Ranges sub-panel

When creating a user group, the IP Ranges sub-panel is
used for specifying IP ranges to be used by the new group.
The top portion of this sub-panel includes a box with Parent
Ranges. Beneath this section are fields for entering a
Starting IP and Ending IP range. Beneath those fields is a
section in which you can Calculate an IP Range by entering
a single IP Address and Subnet Mask. At the bottom portion
of this sub-panel is the Assigned Ranges list box that
includes any IP ranges that have been added.
NOTE: If using IP group authentication, parent ranges do not
display in this sub-panel unless an IP range was originally set up
for this user group's parent user group. To set up the first parent
user group to include an IP range, "All" user groups must be used
as the base group.
Fig. 3:1-5 Add user group, IP Ranges sub-panel
591
M86 S U G
ECURITY SER UIDE