Using More Than One Web Filter On The Network - M86 Security M86 User Manual

WF G A
LOBAL DMINISTRATOR
150
S C
ECTION HAPTER

Using More than One Web Filter on the Network

Using the synchronization process, all target servers are
updated with profile/library setting changes, so that no
matter which Web Filter the user's client PC accesses, the
user's Internet session will be appropriately filtered and
blocked.
Set up a Web Filter to be a Source Server
A Web Filter configured to be a "source" server will send
profile/library setting changes to other Web Filter ("target")
servers.
WARNING: If a Web Filter is set up in the Source mode with a
Network Address Translation (NAT) device between the source
and target server(s), be sure that ports 26262, 26268, and 88 are
open on the source server. This setup is required so that the
source server can communicate with the target server(s).
For the Source mode setting:
1. In the Mode frame, click "Source" to display the Source
mode view:
Fig. 2:1-47 Setup window, Source mode
1: S
YSTEM SCREEN
M86 S U G
ECURITY SER UIDE