M86 Security M86 User Manual page 866

S R S
ECURITY EPORTS ECTION
838
C 1: S
HAPTER ECURITY
Fig. 6:1-14 Schedule Settings
3. Enter a Name for the report run event you are sched-
uling.
4. Select the frequency When to Run from the pull-down
menu (Daily, Weekly, or Monthly).
If Weekly, specify the Day of the Week from the pull-
down menu (Sunday - Saturday).
If Monthly, specify the Day of the Month from the pull-
down menu (1 - 31).
5. Select the Start Time for the report: 1 - 12 for the hour,
0 - 59 for the minutes, and AM or PM.
NOTE: The default Start Time is 8:00 AM. If you wish to run a
report today and this time has already passed, be sure to select a
future time.
TIP: Click Cancel to close the pop-up window without saving a
schedule.
6. Click Save at the bottom of the Security Report Wizard
panel to save your settings and to add the report to the
schedule to be run (see Report Schedule in Chapter 3 of
the Productivity Reports Section).
R
EPORTS
M86 S U G
ECURITY SER UIDE