Specify Monitoring Settings - M86 Security M86 User Manual

Specify Monitoring Settings

Set up Community Token for Public Access
Enter the password to be used as the Community token
for public access. This is the password that the manage-
ment Web Filter console would use when requesting
access.
Create, Build the Access Control List
1. In the Enter new IP to add field, enter the IP address of
2. Click Add to include the entry in the Access control list
3. After all entries are made, click Save Changes.
Maintain the Access Control List
1. To remove one or more IP addresses from the list, select
2. Click Delete.
3. Click Save Changes.
M86 S U G
ECURITY SER UIDE
WF G
LOBAL
an interface from/to which the SNMP should receive/
send data.
box.
Repeat steps 1 and 2 for each IP address to be included
in the list.
each IP address from the Access control list, using the
Ctrl key for multiple selections.
A S
DMINISTRATOR ECTION
C 1: S
HAPTER YSTEM SCREEN
185