Removing/Adding Web Filter, Swg Devices - M86 Security M86 User Manual

SR R M
EPORT ANAGER
626
A S
DMINISTRATION ECTION

Removing/adding Web Filter, SWG devices

Please note the following conditions that occur if removing a
Web Filter and/or SWG device, and/or adding another
device of either of these types:
Device(s) Change(s)
listed in made to
registry registry
SWG Remove
SWG
SWG Retain SWG
and add Web
Filter
SWG and Retain Web
Web Filter Filter only
Web Filter Remove
Web Filter
Web Filter Retain Web
Filter and
add SWG
Web Filter Retain SWG
and SWG only
WARNING: For any scenario specified above that would result in
data being purged from the Security Reporter, M86 recommends
backing up and saving current SR data off the server before
adding or removing the designated device from the device
registry. If this is a WFR unit with RAID, please refer to the
Backup screen sub-section from Chapter 2 of the SR System
Configuration Section of this User Guide for information about
backing up data.
C 2: D
HAPTER ATABASE
Result
All data for Time Usage Reports, Sum-
mary Reports, Summary Drill Down
Reports and Detail Drill Down Reports
will be purged.
All data for Time Usage Reports, Sum-
mary Reports, Summary Drill Down
Reports and Detail Drill Down Reports
will be purged.
Web Filter productivity data will be
retained, SWG and security report data
will be purged.
All data for Time Usage Reports, Sum-
mary Reports, Summary Drill Down
Reports and Detail Drill Down Reports
will be purged.
No data will be purged.
All data for Time Usage Reports, Sum-
mary Reports, Summary Drill Down
Reports and Detail Drill Down Reports
will be purged.
M
ANAGEMENT
M86 S U
ECURITY SER
G
UIDE