Remove A Backup File - M86 Security M86 User Manual

WF G A
LOBAL DMINISTRATOR
178
S C
ECTION HAPTER
2. Click Browse... to open the Choose file window.
3. Select the file to be uploaded. After the file is selected,
the Choose file window closes.
4. In the pop-up window, type in a Comment about the file.
5. Select the Type of file to be uploaded (CONFIG_ONLY,
LIBRARY_ONLY, or both CONFIG_AND_LIBRARY).
6. Click Upload File to upload this file to the server. If the
file is successfully uploaded, the pop-up window's
banner name says: "Upload Successful." After a few
seconds, the pop-up window closes.
7. Click Refresh to display a new row for the uploaded file
in the Backup Configurations grid.
Restore Configurations to the Server
To restore configurations or library modifications from a
previous backup:
1. Select the file from the Backup Configurations grid.
2. Click Restore to overwrite the current settings.

Remove a Backup File

To remove a file from the Backup Configurations grid:
1. Select the file.
2. Click Delete.
1: S
YSTEM SCREEN
M86 S U G
ECURITY SER UIDE