Target(S) Filtering - M86 Security M86 User Manual

WF G A S C 1: S
LOBAL DMINISTRATOR ECTION HAPTER YSTEM SCREEN
To create a whitelist of pattern IP addresses, see the Pattern
Detection Whitelist window in Chapter 3: Library screen.
Disable Pattern Blocking
Click "Off" to disable Pattern Blocking.
NOTE: After making all entries in this window, click Apply.

Target(s) Filtering

The Target(s) Filtering frame only displays if the Web Filter
currently being configured is set up in the Source mode for
synchronization. The default setting has All Target(s)
Filtering "On".
Disable Filtering on Target Servers
To disable All Target(s) Filtering, click the "Off" radio
button. Each target server on the network will not filter the
Range to Detect specified on that server.
Enable Filtering on Target Servers
To enable All Target(s) Filtering, click the "On" radio
button. Each target server on the network will filter the
Range to Detect specified on that server.
NOTE: After making all entries in this window, click Apply.
85
M86 S U G
ECURITY SER UIDE