Power Supply Failure - M86 Security M86 User Manual

WFR A S A II
PPENDICES ECTION PPENDIX
Step 4: Rebuild the hard drive
Once the failed hard drive has been replaced, return to the
Hardware Failure Detection window in the Administrator
console, and click Rebuild to proceed with the rebuild
process.
WARNING: When the RAID array reconstruction process begins,
the Administrator console will close and the hard drive will
become inaccessible.
Step 5: Contact Technical Support
Contact Technical Support to order a new replacement hard
drive and for instructions on returning your failed hard drive
to M86.

Power supply failure

Step 1: Verify the power supply has failed
The administrator of the server is alerted to a power supply
failure on the 500 series chassis by an audible alarm and an
amber power supply LED—or an unlit LED—on the front of
the chassis.
NOTE: A steady amber power supply LED on a 500 series
chassis also may indicate a disconnected or loose power supply
cord. Verify that the power supply cord is plugged in completely
before removing a power supply.
Step 2: Contact Technical Support
Contact Technical Support for assistance with installing the
replacement power supply, or to order a new replacement
power supply, or for instructions on returning your failed
power supply to M86.
885
M86 S U G
ECURITY SER UIDE