Configuration - M86 Security M86 User Manual

Configuration

Set up Blocking Criteria
1. At Reset the X-Strike count upon authentication, "Off"
2. Enter the Maximum Strikes Before "Locking" the
3. Enter the Time Span in Minutes to Track the No. of
4. Enter the number of seconds for the Flood Tolerance
5. Specify the "Locked" Life Time (Measured in
6. Specify a Redirect URL to be used when the end user is
M86 S U G
ECURITY SER UIDE
WF G
LOBAL
is selected by default. To have all strikes reset before an
end user is authenticated, click "On".
Workstation. This is the number of attempts a user can
make to access an unacceptable site before that user is
prevented from using the Internet. The default is 5, and
the maximum limit is 1000.
Strikes Within Category. This is the amount of time
between a given user's first strike and the strike that will
lock out that user from his/her Internet access. The
default setting is 5, and the maximum limit is 1440
minutes (24 hours).
Delay, which is the maximum amount of time that will
elapse before a user who accesses the same inappro-
priate URL will receive another strike. The default setting
and the maximum limit is 4 seconds.
Minutes), which is the number of minutes a user's work-
station will be locked. Choose either "Unlimited", or
"Defined".
If "Defined" is selected, enter the number of minutes in
the text box. The default setting is 5.
locked out from his/her workstation. By default, "Default
"Alternate" Locked Block Page" is selected, indicating
that the standard lock out block page will display.
A S
DMINISTRATOR ECTION
C 1: S
HAPTER YSTEM SCREEN
189