Lockout Function - M86 Security M86 User Manual

Lockout function

To set up the lockout function:
1. Click the checkbox corresponding to Lockout to activate
2. Specify the Severity of the end users' lockout:
TIP: To remove one or more library categories/ports from the
Assigned Categories/Groups list box, make your selection(s), and
then click <remove to move the selection(s) back to the Available
Categories/Groups list.
3. Specify the Duration (minutes) of the lockout (the default
M86 S U G
ECURITY SER UIDE
R T R
EAL IME EPORTS
the Severity and Duration (minutes) fields.
• Low - Choosing this option opens the Low Lockout
Components accordion containing the Available Cate-
gories/Groups and Assigned Categories/Groups sub-
panels.
Select the library category/categories or protocol(s)
the end user should not access.
For bandwidth gauges, to specify a port number the
user should not access, type a specific value in the
Port Number field, and/or use the up/down arrow
buttons to increment/decrement the current value by
one.
Click Add (for URL gauges) or Add Port (for band-
width gauges) to move the selection(s) to the Assigned
Categories/Groups list box.
• Medium - Choosing this option will lock out an end
user from World Wide Web access if he/she reaches
the threshold limit set up for the gauge.
• High - Choosing this option will lock out an end user
from network access via a TCP connection if he/she
reaches the threshold limit set up for the gauge.
is "15" minutes), or click the "Unlimited" checkbox.
S C 3: A
ECTION HAPTER
, L M
LERTS OCKOUT ANAGEMENT
795