Active Profile Lookup Window - M86 Security M86 User Manual

WF G A
LOBAL DMINISTRATOR
124
S C
ECTION HAPTER
8. After performing the fixes on the Web Filter, return to this
window and click Disable to resume filtering the network.

Active Profile Lookup window

The Active Profile Lookup window displays when Active
Profile Lookup is selected from the Diagnostics menu. This
window is used for verifying whether an entity has an active
filtering profile. This window also is used for troubleshooting
synchronization on "target" Web Filters, to verify whether
settings for user profiles match the ones synced over from
the "source" Web Filter.
Fig. 2:1-24 Active Profile Lookup window
NOTE: In order to use this diagnostic tool, IP groups and/or
members must be set up in the Policy section of the Web Filter,
and each IP group and/or member must have a filtering profile.
MAC addresses are used in the mobile mode only.
1: S
YSTEM SCREEN
M86 S U G
ECURITY SER UIDE