Add The Ip Address Of The Member; Remove A Member From The Group - M86 Security M86 User Manual

WF G A
ROUP DMINISTRATOR
356
S C
ECTION HAPTER

Add the IP Address of the Member

If using the invisible or router mode:
1. Specify whether to add an IP address range with or
without a netmask by selecting either "Source IP" or
"Source IP Start / End".
• If "Source IP" was selected, enter the IP address, and
specify the netmask in the Source IP fields.
• If "Source IP Start / End" was selected, enter the Start
and End of the IP address range.
2. Click Add to include the IP address entry in the Current
Members list box.
TIP: Click Calculator to open the IP Calculator, and calculate IP
ranges without any overlaps. Enter the IP address, specify the
Netmask, and then click Calculate to display results in the Min
Host and Max Host fields. Click Close to exit.

Remove a Member from the Group

To remove an entry from the Current Members list box:
1. Select the member from the list box.
2. Click Remove.
1: P
OLICY SCREEN
M86 S U G
ECURITY SER UIDE