Add A Custom Category Group - M86 Security M86 User Manual

SR R
EPORT

Add a Custom Category Group

1. At the bottom of the Custom Category Group sub-panel,
2. In the Custom Category Group Detail sub-panel, type in
3. Specify the Service Type to use: "URL" or "Bandwidth".
4. Include the following Member Categories based on the
NOTE: At least one library category/protocol/port must be
selected when creating a gauge.
TIP: To remove one or more library categories or ports from the
Assigned Categories/Ports list box, make your selection(s), and
then click Remove to remove the selection(s).
5. Click Save to save your settings and to include the name
M86 S U G
ECURITY SER UIDE
M A
ANAGER DMINISTRATION
click Add.
the Category Group Name.
Service Type selection:
• URL - Select Available Categories from the list and
click Add to move the selection(s) to the Assigned
Categories list box.
• Bandwidth - In the Port Number field, type in a specific
value in the pre-populated field, and/or use the up/
down arrow buttons to increment/decrement the
current value by one, and then click Add Port to move
the selection to the Assigned Ports list box.
of the group you added in the Custom Category Group
list.
S C 3: R
ECTION HAPTER
C
EPORT ONFIGURATION
661