Low Severity Lockout - M86 Security M86 User Manual

4. After performing the additional steps based on the
5. Click OK to close the alert box and to lock out the user

Low severity lockout

If a "Low" Severity lockout was selected, the Available Cate-
gories/Groups box displays. Do the following:
• If using the URL tab, choose the library category/catego-
• If using the Bandwidth tab, make a selection from the
NOTE: In the Available Categories/Groups box, a global adminis-
trator will not see the "All Categories" selection for URL gauges,
nor see the "All Protocols" selection available for bandwidth
gauges. In order to lock out end users using either of these selec-
tions, a "Medium" severity lockout should be used.
M86 S U G
ECURITY SER UIDE
R T R
EAL IME EPORTS
• High - This selection locks out the end user from all
network access via a TCP connection (see Medium
and High severity lockout).
chosen lockout Severity level, click Lockout at the
bottom of the sub-panel to open the Info alert box with a
message informing you that the user has been locked
out.
from the designated library categories/ports for the spec-
ified duration of time.
ries from the list. Up to 15 categories or one category
group/class can be added.
protocols in the list.
You can also enter a port number in the Port Number
field, or modify the value in that field by clicking the up/
down arrows to increment/decrement the current value
by one, and then click Add Port to include the port
number in the Assigned Categories/Groups sub-panel.
Up to 15 port numbers can be added.
S C 2: C
ECTION HAPTER
G S , U
USTOM AUGE ETUP SAGE
787