Calculate Ip Ranges Without Overlaps - M86 Security IR Web Filter User Manual

Calculate IP Ranges without Overlaps

The Calculator button displays on windows in which IP
ranges are entered. These windows include: Range to
Detect and Members windows from the Policy section, and
Block Page Route Table window from the System section.
Fig. 1:4-15 IP Calculator pop-up window
This window is used to view and/or calculate the minimum
and maximum range for an IP address.
1. Click Calculator to open the IP Calculator pop-up
TIP: If necessary, make a different IP address entry and Netmask
selection, and then click Calculate to display different Min Host
and Max Host results.
M86 S U G
ECURITY SER UIDE
window.
• If the IP address field in the window on the console is
already populated, note the IP Calculator pop-up
window displays the IP address, default Netmask in
both the Dotted Decimals Notation (e.g.
"255.255.255.248") and CIDR Notation (e.g. "29")
format, Min Host, and Max Host IP addresses.
• If the IP address field in the window on the console is
empty, in this pop-up window enter the IP address,
specify the Dotted Decimals Notation Netmask, and
then click Calculate to display the Min Host and Max
Host IP addresses.
I S
NTRODUCTORY ECTION
C 4: G S
HAPTER ETTING TARTED
67