Specify Network Time Protocol Servers - M86 Security M86 User Manual

WF G A S C 1: S
LOBAL DMINISTRATOR ECTION HAPTER YSTEM SCREEN

Specify Network Time Protocol Servers

In the Details frame, three NTP server IP addresses display
by default in the Servers list box. These IP addresses are:
128.59.35.142, 142.3.100.15, and 129.132.98.11.
NOTE: Any IP address following the first entry in the Servers list
box is only used in the event that the Web Filter cannot access
the primary time NTP server specified. IP addresses are used in
the order in which they display in the list box.
Add an NTP Server
To add an NTP server:
1. Enter the IP address in the NTP Server field.
2. Click Add to include this IP address in the Servers list
box.
3. Click Apply to apply your settings.
Remove an NTP Server
To remove an NTP server:
1. Select the IP address from the Servers list box.
2. Click Delete.
3. Click Apply to apply your settings.
99
M86 S U G
ECURITY SER UIDE