M86 Security M86 User Manual page 605

NOTE: The maximum number of failed attempts that can be
entered is 10.
M86 S U G
ECURITY SER UIDE
SR S C
YSTEM ONFIGURATION
• At the Lockout by Username field, click the radio
button corresponding to either of the following options:
• ON - Choose this option to lock out the user by
username if the incorrect password is entered—for
the number of times specified in the Allowable
Number of Failed Password Attempts field—within
the interval defined in the Failed Password
Attempts Timespan (in minutes) field.
• OFF - Choose this option if the user will not be
locked out by username after entering the incorrect
password.
• At the Lockout by IP Address field, click the radio
button corresponding to either of the following options:
• ON - Choose this option to lock out the user by IP
address if the incorrect password is entered—for
the number of times specified in the Allowable
Number of Failed Password Attempts field—within
the interval defined in the Failed Password
Attempts Timespan (in minutes) field.
• OFF - Choose this option if the user will not be
locked out by IP address after entering the
incorrect password.
• Allowable Number of Failed Password Attempts -
With the Lockout by Username and/or Lockout by IP
Address option(s) enabled, enter the number of times
a user can enter an incorrect password during the
interval defined in the Failed Password Attempts
Timespan (in minutes) field before being locked out of
the SR user interface.
S C 2: C
ECTION HAPTER
S
ONFIGURING THE ERVER
577