Add, Remove A Bandwidth Range; View Other Device Criteria; View Smtp Device Criteria - M86 Security M86 User Manual

SR R M
EPORT ANAGER
630
A S
DMINISTRATION ECTION

Add, remove a bandwidth range

1. Do the following in the Bandwidth Range section:
• To add a bandwidth IP address range:
a. Type in the IP Address.
b. Type in the Subnet Mask.
c. Click Add to add the bandwidth IP range in the list
box.
• To remove a bandwidth IP address range:
a. Select the IP address range from the list box; this
action activates the Remove button.
b. Click Remove to remove the IP address range.
TIP: Click Cancel to close the pop-up window without saving your
entries.
2. After making all modifications in this window, click Save
to save your edits and to close the pop-up window.

View Other Device Criteria

View only actions are permitted in the Device Registry panel
for the following devices: SMTP, Patch Server, NTP Server,
and Proxy Server.

View SMTP device criteria

1. Go to the image of the SMTP server in the Device
Registry panel and click View to open the SMTP Server
pop-up window:
C 2: D
HAPTER ATABASE
M
ANAGEMENT
M86 S U
ECURITY SER
G
UIDE